how to install NI-VISA driver in ubuntu distribution (18.04)
Hello,I trying to find the NI-VISA for Linux, however that option is not available on the page Link:https://www.ni.com/zh-cn/support/downloads/drivers/download.ni-visa.html#409839Where is the link to...
View ArticleNI USB-8452: Read FIFO Accelerometer
Hi everyone, I have written a small program with which I can read an accelerometer via the FIFO with the help of the NI USB-8452 SPI interface.That works pretty well so far and I can read out the X, Y...
View ArticleStanford Research Systems SIM960 Read Error
Hello! I am using the drivers that are available online for a PID system, SIM960 from Stanford Research Systems. I made the VI attached here and am using the default subVIs "Configure Setpoint" and...
View ArticleGPIB - 1073807202 error - working in NI MAX
DA, I have a test setup where I control a high voltage source via GPIB. The labview program is running as an executable and laview 2018 RTE is installed. We've started the program no already several...
View ArticlePCI-GPIB on Windows 10
Hello Everyone! We are running MS Workstation with PCI-GPIB and would like to switch to Windows 10.Is PCI-GPIB compatible with windows 10? I have installed NI 488 drivers and the PCI card is showing...
View ArticleUsing Labview VISA to send command to R&S DSA chokes on the VISA Read
Hi Community Friends I have a Rhode and Schwarz DSA (fairly new instrument for measuring BER and MER and Spectrum analyzer functions). I wrote a very simple VI in Labview 2010 to just write commands to...
View ArticleLabview VISA or TCPIP basic communication with R&S DSA Times out on the Read
Hi Community Friends I have a Rhode and Schwarz DSA (fairly new instrument for measuring BER and MER and Spectrum analyzer functions). I wrote a very simple VI in Labview 2010 to just write commands to...
View ArticleUSB-GPIB-HS
Hello,I have installed NI-VISA 17.5 on my windows 10 computer. It easily finds USB instruments attached to my computer and I can establish a communication link with those.However, I have old...
View ArticleClik here to view.
Fatal internal error:memory.cpp,line 638
memory errorRespected sir.We have ni program based on visa ,its showing Fatal internal error:memory.cpp,line 638 error xwhen its in operation,earlier we used it in windows xp sp1,which worked fine and...
View ArticleHow to identify if trigger is received
I am using TSO 3052 scope. How can I find if a trigger has received? If received then then need to capture and save the image. I am using LV drivers as found on ni.com site.Thanks!!
View ArticleNI1433 serial communication .NET
I have recently purchased a NI-1433 CameraLink framegrabber and have some questions on serial control.The manual states that: .NET—Use the serial interface programmatically, through calls to the...
View ArticleClik here to view.
Drive ethernet power supply from cRIO-9045
Hello all, I would like to control a power supply (EA-PSI 91500-30) with my cRIO-9045 but I can't add a network device on iMAX I have this message : After, I tested directly with NI veristand and...
View ArticleClik here to view.
cRio-9045 VISA Network Resource Creation
Hi all, I am trying to create a Visa Network Device resource on my cRio 9045. When I try to create a Visa a device I get the following.I believe I have the correct drivers/software installed but with...
View ArticleGPIB-120B Model Number Clarification
I have a bus isolator/expander unit that is a GPIB-120B. When looking at a datasheet, I see the part numbers in the ordering information being: 779651-01 for US (120 VAC)779651-04 for Universal Euro...
View ArticleInstruments with same VISA name
I have a setup with many instruments being controlled from a central computer. The program that I'm writing interfaces with a coherent OBIS laser through the VISA port ASRL8::INSTR, which works just...
View ArticleYokogawa gs200 not responding to any queary (GPIB)
Hi all, I am trying to program a Yokogawa gs200 and NI MAX recognizes it, but any queary or read command is returned by a timeout error and the red error light is always on on the instrument after the...
View ArticleHow gpib-usb-hs+ capture works
Hello,I am working on establishing communication with a pc, the pc isn't standard but has a gpib bus to communicate with.My goal is to read this pc memory from address that I choose using this pc gpib...
View ArticleDemo for pxi6552 pix6509 control by python code
Hi folks, i want to use python script to control pxi6509 and pxi6552 .do you have any available demo code to share with me? Thanks.
View ArticleNI-VISA communication with Klinger MC2
Hello, I'm trying to connect my laptop and Klinger MC2 by using GPIB-usb cable.In NI-VISA, the instrument only can work well for "write" commend, but can't work for "query" and "read" commends. Does...
View ArticleRemote control of MSP-GANG (new programmer)
Hello,I'm trying to use the new MSP-GANG remotely and since I didn't found the answer that I need on internet, I open a new topic here.What I need to do is to:- Connect to MSP-GANG- Load a config (for...
View Article