Marconi 2031 signal generator with GPIB (Agilent 82375B)
Hello there!I have a Marconi (Aeroflex) 2031 that I want to send commands to from my computer using C#. I am trying to do this with a GPIB device named "82375B" from Agilent.Does anyone mind sending me...
View ArticleHow to control RPLIDAR A2M8 , I try to sent data by serial port(UART) but...
Now ,I want the lidar work as I sent data refer to picture below but not response . My opinion to control the lidar by sent serial port , i sent string data to Visa Write on picture below it dosent...
View Article2400 Keithley Delta Mode example?
Is there any example labview program for initializing and configuring the 2400 Keithley for Delta Mode measurement? I have the 2400 bipolar current sourcemeter and the 2182A voltmeter. I want to write...
View ArticleI'm a beginner trying to automate my lab's E5061B network analyzer - not sure...
Hi guys, I'm working with this driver in LabVIEW to automate my lab's E5061B network analyzer. I haven't really found a manual that explains in some detail what each VI does, so I'm having trouble...
View ArticleCan't find drivers after package manager download
Hi NI Community, I have downloaded instrument drivers for a SDS2204X oscilloscope (here) using the NI package manager. After downloading, I cannot find the drivers on my computer. I have checked all...
View ArticleNI-VISA 4.6.1 full download
HelloWhere I can download NI-VISA 4.6.1 full ?on https://www.ni.com/ro-ro/support/downloads/drivers/download.ni-visa.html#306013the latest version is 5.4 ☹️
View ArticleUnable to Stream from LabJack in C#
Hello, I am attempting to create a C# program that will stream measurements from a pin on a U3 LabJack and return the measurements in an array. I have been having a lot of trouble getting my program...
View ArticleClik here to view.
Espec RS485 error 0
Hello everyone, Currently, i work on an oven from Espec, the EHS 221MD for HAST reliabilitytest and i want to be able to communicate with to collect some data ( temperature, humidity...) and start /...
View Articleboxcar SR245 communication via GPIB
Hi everyone,I'm trying to communicate with the SR245 boxcar via GPIB connection. I can see and communicate with the device in the NI MAX environment. However, when I try to run a very simple query VI,...
View ArticleSR530 VISA Command Issues
In an experiment I was trying to communicate with a Lock-In SR530 and I was having a lot of trouble. Right now I have found the solution but I want to understand what is going on. Basically, using the...
View Articleis there a lake shore model 218 driver for LabVIEW 2020?
Hi, I've been trying to control the lake shore model 218 with using LabVIEW 2020. I success to connect the model 218 to NI MAX with PXI-GPIB board but I can't find the driver for labview 2020. But...
View ArticleNI-DAQmx and Visual Studio 2019 stop working together
I wrote a DAQ program in VS 2015/2019 about a year and a half ago that interfaces with an NI-9171/NI-9217 RTD module. We haven't used for about a year and now it crashes when it tries to start the NI...
View ArticleRE: Driver download for SRS-DS345 from sine.ni.com not availible
Hi All, I am trying to download the serial driver for the Stanford Research DS345 arbitrary waveform synthesizer and I am having an issue getting the driver from sine.ni.comI am using LabVIEW 2018 for...
View Articlebesoin d'aide
Bonjour madame, monsieur, j'ai pour projet de réécrire un programme qui est en Visual basique en LabVIEW afin de contrôler un bras a 2 axe qui permet de mesure la température de sortir d'air...
View ArticleUnintended Internal Warning at NI Max
Hello,I am getting this error when I open the NI Max, it then freezes the NI Max and becomes unusable: The ni-pxi plug-in caused an exception in the ExpertManager::InitializeExpert function in the MAX...
View ArticlePCI-GPIB+
I need to activate drivers for a PCI-GPIB+ card supplied by Quantum Design (https://qdusa.com/) with their PPMS. I downloaded Windows NI4882 version 20 and installed it. What must I purchase and/or...
View ArticleKeithley 6221 is not showing in NIMAX
What is the port number of Keithley 6221 DC and AC current source? Dear all,I am trying to interface Keithley 6221 DC and AC current source through LAN cable. The instrument is not automatically...
View ArticleHow to speed up VISA LAN instruments?
Currently I'm working on a project where I'm using a lof of Keysight instruments (Power supplies, loads, DMMs) In the old system we used GPIB and I could see in NI IO trace that a read current command...
View ArticleSending multiple commands in Visa to Initialize Autowave
Hello,I am trying to Automate test LV-124 in Labview. I am using two machines called Autowave and VDS200Nx by Emtest.My aim:1. sending commands to call test files 2. Run the test on the Device under...
View Article