RS 232 Communication Initialization
Hello everyone, my name is Carl and I have a problem communicating with a Mass Flow Controller. Before developing a more advanced program I wanted to check the communication and how this works ( I'm...
View ArticleUSB-6525 not controllable by VISA
Hello, I have acquired an USB-6525 and I'm trying to make it works on a debian Jessie distribution : 3.16.0-4-amd64 After several web research , I managed to make NidaqmxBase 15 works on this...
View ArticleClik here to view.
VISA: (Hex 0xBFFF001D) The specified attribute is not defined or supported by...
Hello all, I am using a translator board from SDI-12 to RS232 and am trying to configure the RS232 communicaiton with VISA however on the interactive control I am coming up with the following error...
View ArticleNI-STS UF3000 EX Prober Driver
HiI am using NI-STS for my wafer sort. Today we were asked to move on a new prober from Accrytech UF3000 EX. Is there a driver available for this prober. If so where can I download these NI-STS prober...
View ArticleClik here to view.
Siglent Strange VISA Behavior
I am puzzled by VISA communications. Everything I've read always talks about opening and closing sessions when "done communicating". This problem is one that I've faced over and over and I always...
View ArticleClik here to view.
Question on multiplex sampling / simultaneous sample & hold
Hello together, I own a NI USB 6211 board which works very well. However I am trying to understand how exactly multiple channels are being converted from analog to digital. Therefore I drew two...
View ArticleSerial Modbus RTU Timeout Error
Hello, I have problem with communication with Mitsubishi Electric 96NSR via Modbus RTU. Device has RS485-USB converter. I tested connection in MAX. I can write, but when I try to read, I encounter...
View ArticleModbus IO server error -1967353900
I am using the NI 9871 module in a cRIO-9066 chassi to do Modbus communication. I have deployed Modbus I/O Server 16, NI-VISA 16, NI-VISA Server 16, NI-Serial 9871 Scan Engine Support 15 to the...
View ArticleNI-XNET and CAN-FD
Hello,The NI website mentionned that XNET interfaces are CAN-FD compliant. Could you confirm to me which are the XNET interfaces compliant with the CAN FD 11898-2:2015 standard ? Regards,
View ArticleConnecting an instrument using GPIB-USB connection.
I am trying to use a GPIB-USB adapter to control a Source Measurement Unit from LabView. However, I am having trouble getting my instrument drivers to recognize the GPIB address that specified for the...
View ArticleClik here to view.
connection failure (error code : -1073807202)
I have agilent G1313A autosampler and wnat to control it with LabVIEW.I downloaded ag1100 Simple Standard Autosampler Example.vi and executed it.But, error -1073807202 occurred at VISA Open in ag1100...
View ArticleNI MAX all GPIB instruments have a red cross
We have a few systems where all GPIB instruments have a red cross overlay. However, clicking on communicate with instrument and getting the IDN, for those instruments that respond to *IDN?, returns...
View ArticleCan I use KUSB 488B with Lockin SR 830
Can I use KUSB 488B with Lockin SR 830 for data transfer purpose? Is it compatible? Thanks
View ArticleError connecting to GPIB driver or device
We are usning Windows Surface Pro 3 running Windows 81.Software is LabVIEW 2013 service pack 1 version 13.0.1f2The Surface is connected to a powered StarTech usb hub.A NI USB-TC01 is connected to the...
View Articlehow to disable ni spy
Hi guys,I have develop a controller to communicating with instrument using gpib. we can see all called 488 functions that was used in controller application by ni spy, Is there a way to stop ni spy...
View ArticleDaytronic 4077 serial rs232 to usb
I was wondering if anyone has ever had issues with the driver for the Daytronic 4077 strain gage controller. I keep having the same error pop up in LabView 2015 which says: "Serial port...
View ArticleCan GPIB Analyzer intercept message ？
We know that GPIB Analyzer can capture message between controller and instrument. Is it possible to monitor one command from controller and stop forwarding to instrument? We just want to control...
View Articletwo apllication communicate with a GPIB device
Hi,an application is running in background communicate with the Maschine, sends and recieves his own Data. My Application should send also his commands to contol the Maschine. It comes somethimes to...
View ArticleVISA read of serial data issue
Hello,I'm starting back to Labview (after a few years) and I've a problem with a basic Serial Read program (using VISA). The code is attached, and my issue is that I'm getting output of "FE FE FE",...
View ArticleNewport ESP300 RS232
I've been trying for a few days now with no luck to control a Newport ESP300 motion controller with NI-VISA through RS232. It seems like it should be straightforward, but everytime I try, I get this:...
View Article