Yokogawa WT333E driver missing?
Is the WT3000 driver the correct one for WT333E power analyzer? I have been trying to get a connection to a Yokogawa WT333E power analyzer, but keep running into issues. I finally got it to show up in...
View ArticleKeithley 6517B firmware update
Has anybody used a NI GPIB-USB-HS to update the firmware on Keithley 6517B? My old firmware (ver. A12) does not allow me to collect Temperature data in the instrument buffer along with current...
View ArticleClik here to view.
Serial Settings: Serial End Mode for Reads Not Executed LabVIEW NI VISA.
Hello, I'm new user, and I have some issues trying to use NI-VISA complements, my block diagram is simple, I want to send a character by serial port when a boolean variable is in certain position. When...
View ArticleClik here to view.
Example programs for Keithley 6517B do not work
I've been trying to use the example programs that come with the driver's for Keithley 6517B with no modifications. Most do not work [I do realize that some are not compatible with 6517B]. I thought...
View ArticleSEAR:STAT ON doesn't work
Hello everyone,I'm currently using NI Max in order to send commands to an oscilloscope Rohde&Schwartz RTM2034.I'm trying to find automatically the maximum amplitude of a signal.Just to begin, we...
View ArticleTCP/IP VISA Instrument communication works in MAX but not when I run VISA...
Using NI MAX, I configure a (TCP/IP) network device, then open the test panel and am able to send commands/read responses to my instrument.I then make a shell of a LabVIEW VI with a basic...
View ArticleHow to use IVI driver on linux platform
Hi all, I am wondering that is there any approach for me to use IVI-driver on linux platform. So far, as far as I knew, I can only use limited python instrument driver provider by keysight. Starve for...
View ArticleControl Mettler Toledo MS6002TS/00 scale with Labview using USB cable
I'm able to send a simple command like Tare or send weight with the VISA test panel, but when I try to write a VISA command in Labview nothing happens. I'm ending the line with \r\n. I'm not getting an...
View ArticleTektronix TBS 2104 won't wait for trigger before acquiring
Hi Everyone,I recently had to switch oscilloscopes and am using a Tektronix TBS 2104 for signal acquisition. I downloaded the vi for the the driver (looks like a generic TBS2000 series set of files)...
View Articlenipalk required key not available rhel 8.5
rhel 8.5 in a secure environment with signed kernel modules. How do I get the key that is being requested or disable the requirement for this specific kernel module?I do not find an alternative...
View ArticleClik here to view.
Disturbed GPIB control from AP Basic / Visual Basic
Hi everyone, I am trying to control a GPIB Instrument by sending simple control-strings from the audio measurement software AP2700 by Audio Precision. I have already tested the GPIB (PCIe) interface...
View ArticleDifferent device scan result between windows and mac
I have a USB device and controlled it from Windows 10 without problem.In NI MAX of Windows, the device is identified as ASRL instrument,and I configured in pyvisa-based python code baud-rate, stop...
View ArticleCommunicating between two GPIB interfaces using NI-VISA on Linux
Hello,I know how to communicate with a measurement instrument equipped with a GPIB interface via NI-VISA using a Linux pc.I have a Linux pc with two GPIB interfaces and NI-VISA installed.Is it possible...
View ArticleGPIB-ENET/100 Linux Driver for Ubuntu
Hi All, I have a GPIB-ENET/100 and I'm trying to find a Ubuntu/Linux 488.2 driver for it - The currently available packages only support the GPIB-ENET/1000 - Is there anyone at NI that I can contact to...
View ArticleLIN To USB Bus Monitor
Hello, I have a NI USB TO LIN converter that has to DB-9 ports. I open up NI Max and run the Bus Monitor on one of the ports to read the LIN packets being transmitted on the the first port. I have...
View ArticleSerial/USB communication with Mbus via NImyRIO(Mbus-LabVIEW)
Hii everyone, I want to read electricity meter(Mbus) with LV. I am new with this protocol. My connection is as follows: Mbus meter to NImyRIO via serial/USB connection and myRIO hardware is connected...
View ArticleVISA read timeout error
Hello, I am very new to LabVIEW and not really used to working with electronics so please bear with me. I am doing a VI for controlling an installation that has some mass flow controllers and some...
View ArticleRS232 communication
I am trying to build a LabVIEW program to communicate with an Inrad Autotracker III. However I am completely new to serial communication and have not been able to find good resources telling me how to...
View ArticleNI Serial driver ver 1.45 needed
Hi all.I know someone else had asked this 10 years ago in 2012, but I currently need a copy of NI serial ver 1.45 driver.I will be very appreciated if anyone happens to still own one and would willing...
View ArticleXNET Bus Monitor - Baud Rate vs. Bit Rate
Hello. I have a PXIe-8510 and TRC-8542 cable. I am trying to read the communication from a sensor through the XNET Bus Monitor. Unfortunately I get no data. The XNET Bus Monitor will import the...
View Article