NI-IO trace for Linux
Hi,I was used to run all the tools with MS Windows machine, but now I am challenged to run T&M SW from a Linux/Ubuntu machine.Is there a way to run NI-tools likeVISA, NI-Max, NI-IO trace on a...
View ArticleRS232 comm problem under Win 10 (Burster Kelvimat 4323)
Hi everyone, I was forced to upgrade some Win7 machines to Win10. Since then, the Burster Kelvimat 4323 has communication issues (same exe, LV2018 SP1 32bit, NI-Serial 17.5.0) Error after PC...
View ArticleHow to find out VISA-address of HMP4040 which does not get listed anywhere?
Hello everyone,you guys are my last hope. I am studying Electrical Engineering and I have a project in which I have to automate a test sequence with some devices.My idea is to write a Python script...
View ArticleIVI Drivers offline
Hi! I'm looking for an IVI driver for a Tecktronix oscilloscope, but I'm facing a problem:the driver is not an offline one here is the download page. If I run the driver ->error messages due to the...
View ArticleInstrument driver for keysight E3648A
If I download the labwindows CVI instrument driver for that device from IDNET I get idnet-hpe364xa-ivi_3.4_online.exe.Unfortunately I need to install this on a system without internet access. But this...
View ArticleClik here to view.
Cryocon 24c connection over RS232
Can anyone give me some information？I want to control a cryocon 24c temperature controller using labview. A NI USB-232 cable was used to connect the instrument. NI-serial configuration and runtime were...
View ArticleFrequency Control of FSW0020 Synthesizer
I'm following the instructions to control the NI FSW0020 synthesizer frequency using Table 2a for native USB control in the Communications Manual here...
View ArticleClik here to view.
connection error while connecting TCP/IP through NI MAX
As per the image attached, I am trying to connect PC1and CRIO9074 with my laptop through ethernet. I already set the IP for CRIO and PC1 & my laptop as per image attached.CRIO is connected very...
View ArticleNI-488.2 no download possible
NI referred me to the NI community. I have a GPIB-USB-B and a GPIB-USB-HS device. To switch from Win 7 to Win 10 I need the driver Ver 17.6, unfortunately I can't download it from the NI site, nothing...
View ArticleSelecting a board for GPIB Analyzer
I am looking for a board (PCI or USB) to use with the GPIB Analyser software. I understand that I need the + version of either the GPIB-USB-HS or the PCI card. When I look at PCI cards I see some that...
View ArticleTrouble communicating in RS232
Hello everyone, I recently changed the computer (from windows 7 to windows 10) that is communicating with a bunch of instrument, especially one in RS232.Since I switched computer, I had trouble...
View ArticleHelp getting started Visual C#
OK I am missing something simple I know but I have searched and I cannot seem to even get started. I am looking to start to develop some c# programs to interface with some test equipment but all the...
View ArticleNI GPIB Analyzer capture depth?
I have not been able to find this in any of the documentation: What is the maximum depth I can capture with the NI analyser before it wraps over?
View ArticleIVI driver for LeCroy HDO 9000 series
Hello all,I'm trying to interface with a Lecroy HDO 9404 oscilloscope.So far I've drawn an almost complete blank.- First tried on Linux using USBTMC or Ethernet connection, sending SCPI, VICP or LXI...
View ArticleMultiple Instruments TCP/IP NI-VISA
OK So I believe I understand the basics of NI-VISA and message-based sessions. I can successfully talk to a single instrument. Now as I scale to multiple, it seems that I have to have multiple open...
View ArticlePCI - GPIB Card error
Hi, I am trying to bring up PCI to GPIB card on Linux machine. I can see the device in the device manager. I have also installed the driver but still it return following error - SendIFC...
View ArticleClik here to view.
[SOS] GPIB - First read successful but second times out
Only happens on read, regardless of the command, they can be two different commands, the second and any following will timeout. The device was functioning perfectly for 4/5 months. If I close and...
View ArticleClik here to view.
Agilent 2702a control
I would like to control the Agilent 2702A using LabVIEW but I was not successful in doing so. I have attached the simple diagram I was trying to use. I would appreciate any comment helping to run the...
View ArticleClik here to view.
Agilent 34980a IVI driver cant install to PC
Hi guysReaching out for helpI encounter one issue that being drag for 2 months.Little bit information,One of my Computer Tester have blue screen issue,As usual ,i send my PC to IT team to format and...
View ArticleMTX3292B-CVC control and data aquisition
I am working on a data collection project through various devices (Multimeter MTX3292, CVC3000 regulator, VS etc...) and I am a beginner with labview, I have consulted some documents to interface the...
View Article