Any drivers for Tektronix DMM4050 communication via GPIB-USB-HS?
Hello everybody!Are there any High-level drivers dedicated for Tektronix DMM4050 communication via GPIB-USB-HS?I tried to find it here...
View Articleusb to serial communication problem
I have a program that is looking for an input from a Click PLC(which is basically being used as an I/O device). the click plc is hooked up to the computer using a USB to rs-232 cable. the program...
View ArticleClik here to view.
HiSLIP communications problems
I have a computer-controlled instrument that NI-MAX doesn't recognize. I need to communicate with it over ethernet, so I decided to implement a HiSLIP server. I chose HiSLIP, since according to...
View ArticleCan´t see AD 7760 in MAX
Hi All,I am trying to control AD7760 board along with EVAL-CED1Z. I installed appropriate drivers for it and after connecting to my PC through USB, I see device working correctly in device manager....
View ArticleUsing NI Zeroconf/mDNS for non-NI devices
I need to discover zeroconf devices on the network. I see that NI VISA uses some sort of mdns. Perhaps dns-sd. Is it possible to access this functionality within labview or CMD to list all devices? It...
View ArticleControl Power supply via GPIB-RS232 converter
Hello, I had a general question on connecting a power supply to my computer. The DC Power Supply I currently have (Agilent 6675A) has a GPIB port and my computer has a USB port. So, any GPIB to USB...
View ArticleClik here to view.
Agilent 33220A DC offset + OPAMP offset is not as it should be when i use...
Hi there,The output of Agilent 33220A can be maximum +5V. I need more than +5V, so i made a simple DC amlifier circuit connected to the 50ohms output of the instrument. (I need 2*Vin)When i set...
View ArticleClik here to view.
NI-VISA 18 Installation hangs on 0% in Windows 10 x64
Stuck on 0%Trying to install NI Visa 18 in Windows 10 64 bit but the installer gets stuck.I tried to turn of the Windows Firewall, and run the installation program as an Administrator. Still, the...
View ArticleGPIB not recognized in Win10
Dear all. our software is not able to find the GPIB0. NIMax also doesn't show it. However, it appears as a USB device (see attached screenshot) and also seems to work properly according to the device...
View ArticlemyRIO UART Arduino Due Issue
Hey Guys!I'm using an Arduino Due to send measurement data to my myRIO1900 via the UART Port. The setup worked when I had the Arduino connected to my PC via USB cable and my LabVIEW code run on my PC...
View ArticleSOS - Cannot detect hardware in NI MAX
Hi all,This is the first time I am writing a NI forum post and I have been developing on LabVIEW for <6 months so please be patient. The situation is the following: we have an old testing platform...
View ArticleMissing "NI Veristand" folder in vi.lib (C:\Program Files\National...
I am trying to use custom device from github for serial communication task with PXIe 8135RT controller RS232 comm port.I downloaded the package from below...
View ArticleMissing Custom Device API.lvlib: Using Serial Port of PXIe Controller in NI...
I have PXIe 1085 chassis and PXIe 8135 RT controller in my HIL setup. My plant model contains plant for GPS which communicates with ECU Under Test over Serial Communication. I don't have serial IO card...
View ArticleHow to use Instrument Addon (github) library for creating custom device to...
I have to use serial port of PXIe 8135 RT Controller for simulating GPS plant signals for one of the HIL applications. I am trying to use "Instrument Custom Device" downloaded from...
View ArticleIVI driver correctly installed doesn't appear in driver sessions NIMAX
Hi,I work with LabView 2018, Ni Max 18.0. I have installed an IVI driver for a power supply. The installation was succesfull, it can be found in file IVI Foundation\IVI\ and in IVI Foundation\VISA as...
View ArticleMultiPort USB Hub and identical HID devices (pid vid)
Where several HID rfid reader devices are used and they are all identical vid pid and no serial #, using VISA how do I prefix the port # to the rfid tag read before being passed to Excel ? That is...
View ArticleTektronix TBS 2014B Waveform/Y-Value Decimal Precision Problem
Hello everyone,I am currently working on a LabVIEW project (LV 2013) where I need to collect a data point from a Tektronix oscilloscope every 5.04 seconds and display it in real time over a period of...
View ArticleConnecting Oscilloscope
hi i want connect the real oscilloscope to labview.can you help me?
View ArticleNI PCI-1426 Library and Drivers
Sorry in advance if this is not the correct location to post this in.I'm trying to install an NI PCI-1426 frame grabber and I'm getting a complaint from my app that the SDK and library aren't...
View Articleissue with CHROMA 69200-1 connected over Ethernet and IVI Driver
Trying To connect CHROMA ATE 69200-1 with Labview using IVI drivers provided by NI.Did all the configuration in MAX and successfully got reply for identification query from system.It means System is...
View Article