Missing IVI.visa.dll and NationalInstruments.Visa.dll after IVI ICPSetup-1601f2
I am missing the IVI and NI Visa .NET DLLs. This is both on a new system and a system that was updated 1/2/2017 using the latest patch (16.0.1) Is this a known issue?Please advise of a quick way to...
View ArticleRe: Visa resource name does not appear in labview
Hi, I'm having the same problem a user srms. I have installed all the Keysight IO library Suite, and I have enabled the tulip in MAX. I can communicate with the instrument using the Keysight softwares,...
View ArticleOcean Optics Flame-NIR Spectrometer Labview Drivers
Has anyone figured out a way to use the Ocean Optics 2000 4000 labview drivers with a Flame-NIR spectrometer? I've used these drivers with the USB 4000 spectrometer and am hoping to use them for my new...
View ArticleIs this a VISA Bug/User Error/Other? (NI-VISA16.0.0 on Scientific Linux 6.8)
After successfully installing Labview 2016 and NI-VISA on a new SL machine, I attempt to run Visa Configuration and get the following: $ visaconf Can't load library /usr/local/lib/liblvrt.so.15.0...
View ArticleOmmiting results from Find VISA Resource
Hello, Problem:I have a third party software communicating with two COM ports, when i run my VI this interferes with labview VISA and throws out an error. I'd like to find a way of running both...
View ArticleNI-VISA Interactive Control can't seem to recognize RS232 port
Hello all, I have been trying for some time to troubleshoot an issue where VISA just cannot see my Lakeshore 218 Temperature Controller. This instrument is connected via RS232 directly into the back...
View ArticleVISA Error 0xBFFF00A5 (VI_ERROR_INTF_NUM_NCONFIG) Encountered in NI-MAX when...
HI,I'm trying to connect to an ATS-810 over GPIB-USB-HS (PC -> USB -> GPIB-USB-HS -> GPIB Cable -> ATS-810). I can see the device clearly with the address "GPIB0::7::INSTR" in NI-MAX under...
View ArticleWhich instrument for arbitrary signal commutation (matrix)
I would like to test a bunch of sensors. Each sensor has a DB15 connector with mixed digital and analog signals (bw ~5MHz, Z ~120R).I am looking for an instrument where I can control which couple of...
View ArticleClik here to view.
EABO(6)
Hi All, I am using NATIONAL INSTRUMENTS NI PCI-GPIB WITH NI-488.2 778032-01 (system controller) to communicate with two tester. Here is the problem, the bytes i write sometimes is not match with the...
View ArticleAgilent 6000 series driver, problem with Read Multiple Waveforms
Lately I am using this plug and play driver to control a oscilloscope but I am not sure I understand how this Read Multiple Waveforms VI works. In my programe I firstly let user configure all channels...
View ArticleThe resource is valid, but VISA cannot currently access it
I try to control a Keithley 2306 by using VISA (the goal is using itfrom python).After installing NIVISA541full.exe, syscfg1601full.exe andNI4882_1500f0.exe I started NI MAX but I get following...
View ArticleUnknown Error- VISA
We are receiving this error from one of our systems where we are using a USB scanner (for scanning bar codes) and this error doesn't let application go ahead as it is designed. User has to kill the...
View ArticleUSB Timeout (0xBFFF0015) Chroma 63200A
Hi,i tried to find a solution for my problem in the forum, but i could not find any solution. I try to control the device via USB. I can set and read the CR-options, but any other specific READ-command...
View ArticleReading the output buffer of a VISA instrument ONLY
Hello Community, I'm working on reading a Watlow F4 temp controller Background details:The watlow's RS-232 port is connected to a serial to ethernet device that connects to the main network PC that has...
View Articlethe ibwrt() pass in VS2005 but fail at vs2010
Hi All,We used ibrd() and ibwrt() when GPIB communication to save time for our customer. It is no problem in VS2005. But for VS2010, it always pop up this dialog box when executing ibwrt() as the...
View ArticleLV does not see GPIB via VISA
Hy you all, I know there ar lots of topics arroud concerning this problem. And yes I have tried a lott. The closet thread I have found might be this one, but that also seems to...
View ArticleUSB RS 485 port not identified or populated in MAX during restart of PXI System
Hi all,I have a scenario, I was able to work with the NI USB RS485 communication cable yesterday and today when I started my PXIe system it's not detected. I physically need to unplug and plug it back...
View ArticleClik here to view.
Problem with controlling TEK oscilloscope DPO7254C (too slow to setup befroe...
Hi,It s my first message on the forum so I hope wrote on the good section on the forum and that my explanations will be clear enough . The program we are trying to build with labview is to read the two...
View ArticleKeysight M9183A DMM
Has anyone already controlled this DMM with LabVIEW ?I'm using the "Agilent M918x.lvlib" driver which ships with the DMM but it doesn't allow to communicate simultaneously with several instruments....
View Articleno communication to serial device after buit application
Hi, I have some trouble with my fresh built application. The little program uses serial/visa communication to gather data from a device via serial port. Everything is working well on my development...
View Article