Clik here to view.
USB-485 and Windows 10
Hi, I have a USB-485 which I have use on a Windows 7 64-pc with no problem. But when trying to install it onto a Windows 10 pro pc then NI MAX indicates that windows has no driver for the device. What...
View Articlescanning for serial port using Labview
My system is Window 7 32-bitLabview 2011I have a usb to serial device. After the device is plugged into the computer, window will show a usb-serial device. Without going to the device manager, is it...
View ArticleCommunication between DG535 and WinSpec
Hi,I am trying to connect DG535 to Winspec.When doing it, I have a pulsed source of 25o msec and a delay of 750 msec.If I use repetative method.What should be the exposure time, Gate width and Gate...
View ArticleDrivers of DG535
Hi,When ever I connect the DG535 to Winspec, I get a Blue screen on my PC.What does this indicate.?Thanks,San08
View ArticleDriver for HP 3478A digital multimeter
Im trying to connect this multimeter to labview, and Im having problems. Im trying to measure the DC voltage, and to show me the measurements in labview. Could someone help me.
View ArticlePXIe-8135 GPIB Scan for Instruments disabled
Hi,I want to connect an electronic load to the PXIe-8135. I bought a Micro D cable and connect the load . When I open the Measuremanet Explorer, I open devices and see the PCI-GPIB. The self-test was...
View Articlerun NIvisaic failed on openSUSE13.1, the error occurs : Can't load library...
Install information: OS vsersion : openSUSE 13.1 NIVISA : nivisa-15.5.0 NI4822 : NI4882-15.1.1 When I run the command "NIvisaic",the error occurs as following : Can't load library...
View ArticleAgilent E3663A VI for constant current mode
Does anyone have the application VI for setting up the constant current mode for Agilent E363X Series Power Supply since I have to set the power supply to run in the constant current mode?I would be...
View ArticleError -1073807360 occurred at Property Node (are 8) in VISA Configure Serial...
hi, I want to write data from labview to my micro controller(PIC18F87J50),but i am getting the above mentioned error,here i will attach my labview code and mcu code ,please go through them and help...
View Articleenvironment
why don't NI think about the environment why spill a lot of energy to download 8GB if you only need a driver of 10 MB i dont know how many NI users are forced to download 8 GB whil the only to need to...
View ArticleKeithley Pulsed 2602a
Hey Experts/All I am relatively new to using the LabView coding for Keithley I am looking to build LabView VI which can pulse a source function and measure a function. Any VI to build on while be...
View ArticleInstallation abort of NI 488.2 in CentOS
I already have installed NI-VISA on this machine, which is running CentOS 7. I have downloaded NI 488.2 from here: http://www.ni.com/download/ni-488.2-3.2/4916/en/and am running the ./INSTALL script as...
View ArticleTNT4882
Now I am using TNT4882 in one-chip mode,when sending the SOFT RESET command(0x22) to the register CMDR, I found that the HALT, STOP bits are not set. Also,the REN bit remained to be set when...
View ArticleReading number from instrument without the driver.
Hi, I am using the instument sr830, a lock-in amplifier via LabVIEW. This instrument uses IEEE-488 port, aka GPIB.Unfortunately, my LabVIEW version is too low to be supported by sr830 driver available...
View Articleinstrument HP3458A
je suis a la recherche de l'instrument pour CVI d'un HP3458A (HP3458A.FP)I am looking for CVI instrument of a HP3458A see HP3458A.FP
View Articlevisa installation on opensuse 13.2
Hi, I am currently trying to install the visa driver 15.5 on opensuse 13.2 as it is supported by ni.I installed the kernel sources, gcc, make etc.And now when I am executing the ./INSTALL script, I get...
View Article2 USB Cameras on same bus
Hi. I have 2 usb cameras which work fine when plugged into seperate USB busses. I want to use multiple cameras with a usb hub and to lower the frame rate. The default frame rate is 30 fps and the...
View ArticleClik here to view.
Communication with Omni-300 Grating Monochromator by USB port
Hi everyone, I'm new here and I'm beginner in labview, so my question will sound wierd to you. I'm trying to do program which will communicate with with Omni-300 Grating Monochromator (from Zolix...
View ArticleTektronix AFG 3102
Hello. With the help of another user i've implemented this code. When i first run after rebooting the the tool it appears the error shown in picture 1. Then, when i try to comunicate it appears the...
View Articlevisa.NS does not see termination character
Due to our remote test controllers running Windows XP, and the instrument being controlled has no Win7 drivers, I am writing x86 code on an XP machine. I am attempting to control an instument using...
View Article