How do I change the GPIB timeout using c#
Hello,I'm trying to use C# to control my GPIB equipment. As long as I use the default timeout, i can read/write/query with no problems. Today I wanted to try to change the timeout so I tried the...
View ArticleHow do I connect UWE UETR-MOST PID controller to LabView
Hi all, I'm new to Labview and I am trying to connect a device made by UWE electronic which PID controlls Peltiers. The device is a UETR-MOST 16A PID controller. I've installed the FTDI (DTXX) drivers...
View Articleerror in acquiring waveform from the agilent 54621A oscilloscope .
error 1074003951 occurs when acquiring waveform from the agilent 54621A oscilloscope.I have installedagilent 546xx series instrument driverNI VISA 14.0
View ArticleNI-PCI 8431
Hello,I have a problem of writing frames with fixed frequency 200Hz(5mS) using the NI PCI-8431/2 and LABVIEW 2013.I cannot get frames with constant frequency 200Hz(5mS). The frequency is changed...
View ArticleUsing global variables with FPGA VI and an main VI
First off, I am fairly new with labview. I am wondering if it was possible to obtain data from an FPGA VI so that it can be read in a regular VI. I tried using global variables, but the data doesn't...
View ArticleUnable to Run NI-488.2 Software
I am running an iMac with OS X 10.5.8, a 2 GHz Intel Core 2 Duo processor, and LabVIEW 7.1. LabVIEW said it installed correctly, and I have even gone back and reinstalled the GPIB software on its own....
View ArticleSingle Driver for ni-rio 9146 without overhead by included support for all...
I recognized that the driver package for NI-Rio 2014 is about 4GB in size but i need only support for NI-Rio 9146.Can i download also a single specific driver?
View Articlecapture a low frequency sinusoid with PXI-4132
I would like to drive a 275Hz 2V amplitude 2V offset above ground sinusoid into the sense hi lo pins of the PXI-4132 & try to capture it to do an FFT & look at the quality of the waveform.I...
View ArticleI can't configure the resolution on my 34460A DMM with IVI
I'm trying to acquire data from my 34460A using IVI. When I use Configure Measurement, the DMM doesn't seem to be taking the resolution properly. It seems to be setting full range (slow) measurements...
View ArticleMyRio Cannot Communicate When the Getting Started Wizard Tries to Set Date...
I cannot seem to get MyRio to communicate with my computer. I have installed all the items on both discs and applied any updates that it asked me to do. I plug in the MyRio, the device window pops up...
View ArticleUSB-485 driver for Windows 7
Does there exist on the NI website a device-secific Windows 7 driver for the USB-485? I know I can download and install NI-Serial package (all 517 Mb of it) and get the driver for this thing, plus the...
View ArticleSerial string log with timestamp
Hello Everyone,I made a Pressure calibrator which continously sends data to pc via UART at an interval selected by user, now we are displaying it on hyper terminal, however I want to design a Labview...
View ArticleHow to create remote control via RS232 for microbalance
Hello,I want to do drivers via RS-232(serial line) for microbalance- communication with pc(remote control), i have manual with serial interface but i don't know how to use it for programming in...
View Articlewhere i can find exemples for PXI-2564 relay module
hello, I'm beginner in PXI module using.I bought a PXI solution for use it as a custom instrument.My aim is to read RTDs and command some line using relays.So i take the system below:NI PXIe 1071...
View Articleis it possible to get the serial number from external C++ code?
Hi, I have a C++ library called by a CLF in the LabVIEW RT from my cRIO. I am trying to use the cRIO serial number in my C++ code for licensing purposes. Is it possible to get the cRIO serial number...
View Articleespec MC-811P don't connect with PC via RS 232 rs 485 converter
Hello all,I'm having some difficulties setting up and RS485 link with a climate control chamber from ESPEC. It is a MC-811P climate chamber. The climate chamber has two male DB9 connectors on the...
View ArticleClik here to view.
What is ni579x?
In our lab we use ni9146 for realtime io (rio).In MAX and in the project explorer this device shows as NI-NI9146-01893549without a warning sign.Connecting this HW to another computer (which shall...
View Articlefor New Instrument Driver, can I encapsulate Serial Interface?
I'm creating a new LabVIEW Driver for a new instrument that uses a Serial Interface. The Instrument has a SCPI library and I use that for control and communication. The hitch is that the Instrument...
View ArticleClik here to view.
Serial Communication with multiple temp controllers
Hello, I’m trying to read the process value from 7 Omron E5CK temp controllers. I’m new to LabView especially working with serial communication. The VI. I created does work but it’s horribly...
View Article