Driver NI-488.2 version 3.0 or earlier
Hi, we have an Aminco-Bowman 2 Espectrofluorimeter with a PCI-GPIB card. We need to work it on a computer with Windows XP SP3. The problem is that we can't find any NI-488.2 driver version 3.0 or...
View Articlecontrol instrument VNA
I'm trying to drive old vna (vector network analyser) equipment. I have problem when I put logarithmic scale I lose control of the instrument during the second acquisition of data. I can't understand...
View ArticleInstalling multiple drivers of the same type
I am attempting to automate a capacitance measurement system and I have come to realize that the GPIB that I am trying to use is not supported in the most recent releases of 488.2. I have already...
View ArticleHow to set up USB message received event using Ni Visa .NET (IEEE 488.2...
I spent the day trying to set up an event based message loop. I have a device that supports USBTMC communication. I can read and write to it using FormatedIO read and write methods. I was trying to...
View ArticleBug in VISA Serial?
Himaybe some else used an ARDUINO with the VISA serial an founds the problem, that the software starts from the begining when the serial is initalised. This comes because the DTR is is connected to the...
View ArticleGPIB on Ubuntu LINUX
Is there any chance to get NI 488.2 drivers running on a Ubuntu Linux? I'm using an PCI-GPIB_TNT5004. The application is a 32-bit application.
View ArticleCore dump GPBI 488.2 on CentOS 8
Hi,the installation of NI4882-17.0.0f0.iso from the NI homepage worked and no errors were displayed.But when starting the GPIB explorer, these error message is shown:/usr/local/bin/gpibexplorer Fatal...
View ArticleCentOS 7: updateNIDrivers failed
Hi,I have a fresh installation of CentOS 7 (DVD CentOS-7-x86_64-DVD-1908.iso) with kernel Linux <hostname> 3.10.0-1062.el7.x86_64 #1 SMP Wed Aug 7 18:08:02 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux...
View ArticleCentOS 7.3: gpibexplorer not running
Because of installation problems in the last CentOS 7 version, I gave CentOS 7.3 a try. CentOS 7.3 is older than GPIB 488.2 drivers (17.0.0f0 is from 05.04.2017). Now installation was working, kernel...
View ArticleWhat value we have to choose for IQ rate in USRP
Hello Every one,What value of IQ rate we have to give in IQ rate while transmitting. it depends on what?i want to transmit a text in a packet based model. After packet formation i have 2 packets of...
View ArticleNI Visa TCPIP Clear method
I am communicating with a Chroma 19036 via NI Visa V19.0 ( TCPIP /message based session ). I need to be able to clear the response buffer as a result of say, issuing multiple writes which generate a...
View ArticleCan USBTMC devices be accessed over a network using nivisaserver on...
Hello, I have v15.1 of NI-488.2 & NI-VISA running on Scientific Linux 6.7 on a 32-bit thin client computer. This computer has a PCI-GPIB adaptor installed and has several network/serial/USB ports....
View Article64 bit ni4882 support on Linux
I am trying to port a program written in Free Pascal that uses the ni4882 library from 32 bit Windows 7 to 64 bit Linux. The program works fine on the 32 bit Windows machine. I installed the latest...
View ArticleMicrocrocontroller based development boards interfacing to GPIB
Hi, I am working on a new multimeter design. I need to add the GPIB interface to this instrument. I found two chips supporting GPIB interface:1. NI TNT48822. NI-NAT9914-Serie Is there any reference...
View ArticleClik here to view.
openSUSE leap 42.2 ERROR installing kernel module
In my fresh installed version of openSUSE leaf 42.2 the kernel module can not be build, while the kernel-source module is installed: ERBUSZE:/usr/local/bin # ./updateNIDrivers <11>Feb 25 22:41:06...
View ArticleClik here to view.
Private LAN, network in which LAN enabled instrument directly connected to...
Test set-up under investigation is a networked in which LAN-enabled MDO4054C Oscilloscope and computer are directly connected, and not connected to site LAN, the image here depicts the error message...
View ArticleOLD PCI - XP - Driver problem
Thank you all in advance for your assistance. I have a National Instruments PCI-GPIB Card 183617G-01 and I am trying to get it installed on an XP machine SP3. This is how it has to be since the...
View ArticleGPIBにて コントローラ側のデリミタを ＣＲにしたい
GPIB-USBを使用しています。ＰＣからコントローラ側へのデリミタを ＣＲにしたいのですが NIMAX などで どのように設定したら良いのでしょうかどなたか教えてください。
View ArticleTNT5002 Boundary Scan
Hi, From the pinout in the datasheet it looks like the TNT5002 is able to act as a boundary scan device. I might want to use this feature and therefore I have the following questions:- Where can I find...
View Article