Driver files for Ni-9861
Hello all, Does anyone have the driver files for NI-9861, or the path where the driver files are located?Device manager recognises "NI 9861", but not able to find drivers for it.i have installed Xnet...
View ArticleKeithley 2400 Continuous Voltage Sweeps
Hi Guys,I'm working on developing a measurement system to measure resistance as a function of time. I am measuring samples with resistances on the order of a few hundred Mohms, which are out of the...
View ArticleLinux use visa？
I now have to use visa on linux(ubuntu) system, but can not find recource, it will print "num is 0" in below code, but lsusb have the device(keithley 2230)how to use visa to control device on linux...
View Articlerecommendations for GPIB card compatible with BSD
Hello, I am seeking a PCI- or PCIx-based GPIB card that's compatible with x86 BSD. The server only needs to control a single RF demodulator unit (this is for a remote time metrology and NTP node) from...
View ArticleChroma source with NI VISA 4.1 on Windows 10
I have a connection problem with my pc and the chroma source 62000H. The operating system on my pc is Windows 10 and the NI VISA 4.1 software is only compatible with the latest version operating...
View ArticleControlling thermotron 8200 using lab view 2010
I am trying to control Thermotron 8200 via Ethernet and GPIB. I am trying to add the instrument driver TH8200(from: http://thermotron.com/service/instrument-drivers). I am using labview 2017 32 bit on...
View Articlereading from IR camera
Hey guys,I just got into working with LabVIEW and I have to read the data from an infrared camera that works with UDP network connection. I want my VI to receive the pixel - intensity data and print it...
View ArticleClik here to view.
NI Spy Time stamp format
I'm Using NI spy. I want to calculate the elapsed time between write and read.Write 08:50:56.5346Read 08:50:56.5358Hour:MimuteecondThe second portion contains decimal point and 4 digits. What should I...
View ArticleInstrument Ethernet Communications
I wish to connect my SR865A lock in amplifier to my laptop using ethernet, I added the resource in max but the open visa test panel option is greyed out and attempting to open it through visa gives...
View ArticleError -1073807305 occurred at VISA Read in Keithley 2450 :.lvlib :Sweep and...
This error happens time to time halting the test software. Error happens after few thousand calls to .vi(5000x to 10000x calls). vi configures instrument to make a two point sweep. vi is from Keithley...
View ArticlePCIe-GPIB+ control 4 devices
Hello everyone, can a PCIe-GPIB+ control 4 GPIB devices at the same time?
View ArticleGPIB-USB-HS+ hangs
Hi, I am having an intermittent problem with a GPIB-USB-HS+. It hangs very occasionally in a call to VISA. The timeout on the call has already expired for a long time, so my first thoughts were that...
View ArticleHow can I determine base address for GPIB0 for use in ibconf.exe?
I am attempting to resurrect several instrument control programs I have used successfully in the past.They are written in GWBASIC (because that is what I have and what I know how to use) and I am...
View ArticleTektronix TDS2004B 4-channel scope: NI-VISA Driver doesn't allow CH3 or CH4...
Hi,I have a Tektronix TDS2004B 4-channel digital oscilloscope, and I've been using the auto-generated Measurement Studio .NET wrapper with the supported NI-VISA driver (provided here: tktds1k2k driver...
View ArticleClik here to view.
Keep getting error : -1073807339 VISA: (Hex 0xBFFF0015) Timeout expired...
I have been trying to communicate to a electronic load using labview in serial mode. The load works fine when communicated with Termite emulator as shown below. I keep getting read errors in LabVIEW....
View ArticleIVI Simulation Driver
Hello, I have the Keysight 67xx IVI driver installed (AgN67xx.dll). I can run the simulation mode no problem through the NI VI "N67xxOutputExample_1.vi". The simulation grabs the:InstrumentFWRevision...
View ArticleKeithley 6517b Remote Humidity Measurement
I am using a 6517b to measure currents and apply voltage to a device under test. Along with the current reading I would like to log the humidity using the optional humidity probe. How can this be...
View ArticleJ1939 Bam tutorial
Greetings, I'm using the J1935 example shown here and I am able to transmit messages between two computers using it.http://www.ni.com/example/31215/en/#toc16 HOwever my type field says CAN data and no...
View ArticleChroma 63204A USB triggered digitizing
I'm trying to control through LabView a Load Chroma 63204A, in order to sample a sinusoidal response from a device.However I've had some problems with the digitizing function, both through Chroma's...
View ArticleIncorrect configuration for USB PORT
Hello,I'm trying to configure a COM Port as a USB port so that I can control a motion controller. I used NI-VISA Driver Wizard to "configure" the port but I got stuck at the "generate a catalog from...
View Article