Hi all,
I am reading power values through a USB configured power sensor in Labview.
I tried the manufacture software (EXE stand alone), and it is working; which may indicate my connection is correct.
1) Please see my labview codes as attached file "codes.PNG".
2) However my labview codes has following error: error -1073807339 VISA Read.
3) The screen shot of device manual was also attached here "manual"
May I ask if someone can give me some tips to solve this issue?
Hi,
We got an error while controlling E363X Power Supply, randomly while reading stabilization voltage we are getting this error.
If anyone has faced similar error, share the details.
Thanks in Advance
Data.vi<ERR>
<b>Reference Not Found:</b> (xBFFC0012) Cannot retrieve user data for the given resource name as there was not data associated with the resource name. Before you can read data, you need to write the user data using the Write Data action of this User Data VI.
Any suggestions or solution
PCie-1433 をWindows10 64bit で使用したいのですが、対応したDriverが見つかりません。どこでダウンロードできますでしょうか。
I can't find any documentation on how to use PXI-8532 DeviceNet card with C++ or .NET only LabView. Since I don't use LabView, can someone point me to the right location?
My question is : Can I use this driver for the DSA875 ? I use the Spectrum analyser DSA875 (7.5GHz)
According to RIGOL DSA800 Series Instrument Driver Readme:
Supported Language(s): LabVIEW
Supported Model(s): DSA815, DSA815-TG
Model(s) Tested: DSA815
The DSA815 is limited with 1.5GHz. They don't talk about the other model, just only the serie DSA800. How I can be sure that it will work with DSA875? I need to know
Does anyone know ?
Thanks, Julien
Hi, I'm new to the Modbus protocol and I want to implement a new system using Modbus and a FL1F low cost smart relay.
Product specifications:
TCF modbus
Android and IOS
WebServer
The company only sells the program to use it
Anyone have experience or something with this product?
Do you recommend another type of relays to make a centralized system (low cost and using Labview)
Hello.
I am trying to use both NI 9751 and NI 9757 module with cRIO 9045 controller.
Both NI 9751 and NI 9757 require a power from a battery, so I bought 12V automotive batter to power both of them.
1. Now my question is what wire size should I use when connecting the battery to the modules?
2. Also, what wire size should I use for NI 9751 if I want to connect the injectors to the module?
The connection distance will be within 10 ft. Thank you!
下载了NI488.2、Labview之后，打开NI MAX通过GPIB访问仪器，点击“扫描设备”，NI MAX界面就会变成未响应状态，任务管理器也关不掉它，请问这是怎么回事？
Here's the program I use to save waveform to data, but the txt file I get is always grabled. I'm not sure if I need to convert the data form or use other function other than the one I'm using 'write to binary file'.
Code:
txt file:
By the way, the file can be normaly read back to waveform.
Hi
I'm currently facing an issue about using GPIB-USB-HS+ on Windows XP mode in Windows7 machine.
And my NI488.2_v2.7.2 is not working, issue is about the driver can't be working correctly. However Windows XP is the only working version for this product.
I found some people were facing similar issue and the fix is in "https://forums.ni.com/t5/Instrument-Control-GPIB-Serial/NI-488-2-does-work-on-Windows-XP-Mode-within-Windows-7/m-p/1767076#M50236".
Somehow, the download like in the fix is no longer available and looks NI website now only provide three 488.2 driver which no one can be used for Windows XP. (I don't get why old driver should be removed from the website)
Can someone from NI please let me know how to get the fix in "https://forums.ni.com/t5/Instrument-Control-GPIB-Serial/NI-488-2-does-work-on-Windows-XP-Mode-within-Windows-7/m-p/1767076#M50236"?
It looks to me NI-488.2 v3.0 has the fix I need, it would be much appreciate if you can send me the installer file of NI-488.2 v3.0.
Regards,
Jarome
Hello,
I am looking for the VISA driver(Ethernet Interface) for this automotive traffic generator made by Technica but I have not found one yet.
If there is none, then is there any generic VISA that I can use?
Thanks in advance!
Nubee
Hi everyone, I want to implement LABVIEW to control the Instrument System CAS 140D spectrometer. The purpose of implementation is to test the response time of the spectrometer to the respective software. Can somebody assist me how to implement LABVIEW to spectrometer? Thanks
Hi,everyone.Can you set the serial port baud rate of myrio1900 to 128000?
Hi,
I want to know in the USB 6215 the communication cable (USB) comes along with that or need to buy separately.
Hello everyone!
I try to find a way to rename the DAQ device name (useralies) in Dot.Net C#?
I only have an option to get UserAlias by using NationalInstruments.SystemConfiguration, but I didn't find any way to set the new UserAlias for my DAQ device. Maybe someone can help to find a way to resolve my case without using LW.
Please, I need it ASAP!!!
Thank you
Work with a testing machine that uses PC with windows 2000 and LabWindows CVI 9.0 I have to communicate with a device under test via USB HID to verify its correct functioning. I found this example code that does not run in my version of LabWindows (created for LabWindows 2010). Since it is not possible for me to update the testing machine, there is someone who can give me an example that I can use with my version of LabWindows?
Thanks in advance.
Hello Ni,
I have a GPIB-USB-B device and I want to use it on my new windows 10 computer.
I've tried my drivers used on my previous windows 7 computer but it doesn't seem to works.
Can you help me ?
Thanks.
Flo.
添付画像の左上の図のように計測器が識別されず，外部ソフトウェアのSGADVANCEでGPIBによる通信ができません．
NI-MAXにで"Q:"を送信すると添付画像の左下のような文字列を受信する状況です．また，"!:"を送信するとRという文字列を受信します．
識別をNGからOKにする方法はありますか？
回答お待ちしております．
Hi,
I want to connect SR830 lock in amplifier with my computer to read output values from it. While connecting lock-in using RS232 to USB in NI Max, write command executes without any error but while giving read command, it gives timeout error before operation is completed.
Similarly, in my labview program read command doesn't work and therefore, the program completes while giving only 0 output all the time.
I have tried changing the RS232 to USB cables and even tried in different computers.
It will be really helpful if someone can help.
Thanks,
Urvashi
