Visual Basic 2005 codes for using ActiveX supplied by Jobin Yvon Spectrometer...
I am writing VB2005 codes using calling the ActiveX (COM) components for the spectrometer iHR320.Usually calling com object resulted in some control in remotely connected iHR320 successfully.But in my...
View ArticleGPIB-USB-HS+ on CentOS 7?
Hi, I'm not sure if this question is appropreate for this forum, if not, please excuse me. I've been struggling to install the driver for GPIB-USB-HS+. I couldn't see any error during the installation,...
View Articlegpib enet from java
Hi,I have a NI GPIB-ENET/100 on which I have gpib devices connected. I would like to access those devices from a Java environment on a linux (debian) machine. There is a linux driver available, but not...
View Articleto control KIKUSUI PWX1500MH in labview 2012 enquiry
Dear All,we purchased a KIKUSUI programmable power supply PWX1500MH, and we are doing programming in labview 2012 to control it and doing measurement.I have downloaded KIKUSUI drivers...
View Articlehow to use labview as virtual printer by parallel port?
hi guys, I try to use labview to read the info of a tester equipment (cirris 1100R+), this equipment send to print a report by parallel port with protocol ascii centronics, i want to read this info...
View ArticleUnable to see Newport ESP301 USB instrument in VISA resource list
I am trying to communicate with a Newport ESP301 controller via USB, using the NI-VISA or PyVISA library. Here is some information about my machine:python -m visa info Machine Details: Platform ID:...
View ArticleClik here to view.
Disign GPIB interface using NAT9914+stm32F103 microcontroler
hi, I am design a GPIB interface board based on the NAT9914 and stm32F103 microcontroler,but I don't know how to read/write the registers,can you give me an example?such as provide me two functions...
View ArticleIsochronous Endpoint with USB RAW
Hello, I'm new to this forum. I just want to implement a USB-interface with the USB RAW block in Labview. By USB device has isochronous endpoint. I'm using NI-VISA driver. I just want to know if it is...
View ArticleClik here to view.
overflow Keithley// GPIB Problem ?
Hello ,I am working on a Relay-test program the hardware is composed from the Keithley to take the mesearment and a Pickering card to match all the pins with the Realy matrix .My problem is when the...
View ArticleNI5132
HI, I am jus trying to read some values ( frequency and phase) from Ni5132 in my program but them are wrong. I tested the scope using Ni MAX and the data was correct. Someone can help me out.
View ArticleGPIB explorer setup with secondary ethernet port
I have GPIB explorer installed on a computer with two ethernet ports connected to two different networks. I have tried to set up GPIB ENET controllers on both networks but GPIB explorer sees only the...
View ArticleClik here to view.
Struggling with setting up a RS-485 connection from a mass flow controller to...
I am an absolute beginner starting from the ground up trying to connect the RS-485 port from a Sierra Instruments mass flow controller (MFC) to the NI cDAQ. The intended pathway that someone before me...
View Articlehow to comunicate power analyzer CVM-C10 to labview?
Saludos. Estoy intentando comunicar un equipo analizador de redes modelo CVM-C10-ITF-485-ICT2 Marca Circutor con Labview 2015 en un computador portatil (Windows 8.1), para lo cual estoy utilizando un...
View ArticleCould not get NI-MAX to see GPIB device
Initially NI-MAX would not see a Keithley DMM connected to a GPIB card installed in a PCI slot in this computer. In order to get a GPIB card made by HP-Agilent-Keysight to work, I downloaded "Agilent...
View ArticleIn NI STS T2 tester - what is purpose of TTL0,TTL1,TTL 2,TTL3 in system...
Hi , Iam unable to find community NI STS T2 tester.If community exists,please send the link to me ,else please forward below query to corresponding technical team related to NI STS T2 tester Please...
View ArticleUpdating GPIB-ENET/100 Firware to C.9
I inherited an older GPIB-ENET/100 and I need to update the firmware to ver C.9. I haven't done it in a long, long time and I vaguely remember there is a trick to do it. I searched this forum and...
View Articlegpib explorer communication ok with ENET/100 but NOT with ENET/1000
Hi, I am having trouble with gpib explorer and ENET/1000 communication. I can happily communicate with ENET/100s, but cannot communicate with ENET/1000s. symptoms are as follows: Searching the network...
View ArticleGetting errors during installation of NI-488.2 drivers on CentOS 7
Hi,I am trying to install the NI-488.2 drivers provided here, on a fresh install of CentOS 7 (centOS 7 seems to be available for x86_64 architectures only). First error I get during the installation is...
View ArticleVector VN8900 stopped working after opening MAX
Hi Everyone, I seriously hope this is the right forum since this issue is rather odd. Yesterday while I was playing around with my setup consisting of a Vector VN8900 + 8970 connected to a PXI 1085 +...
View ArticleSerial Communication Failure with VISA Read
I am able to successfully communicate with the device, however, the output reads the default value everyother time. The VISA Read function reads the command everyother time instead of the value. When...
View Article