Set more 2 primary adress
Hi everybody I have 2 pc. The first is the master with the test program, and the 2nd PC have a controller PXI with some DMM-Counter Timer....2 pc are pluged with GPIB.I want to simulate more Primare...
View Article16902A Agilent Logic Analyzer
Hello,I have a 16902A Agilent Logic Analyzer and would like to control it via LabVIEW. However, I could not find any drivers for it. Is there any way I can control it by LabVIEW ?
View ArticleNI-MAX vs. Teraterm
Hi, I am trying to communicate with a vacuum gauge controller, Varian XGS-600 via RS232. When I use NI-MAX or LabVIEW for that matter, I have to repeat every command twice before getting the correct...
View ArticleMy Measurement & Automation can detect the keithley 2400, but the LabTracer...
Just as I said in the subject. The Measurement & Automation can detect Keithley 2400. But when I use the LabTracer, it always shows "there was an error reported in the script engine. test aborted."...
View ArticleIviConfigServer.IviConfigStore.1: Deserialize failed. Invalid argument....
Hi, We execute the following method: IIviConfigStorePtr cs(__uuidof(IviConfigStore)); if (cs == NULL) throw("The driver could not be...
View ArticleIVI drivers not shown in MAX
I open MAX to create a New Logical Name, but once I’ve created the Logical Name, no Drivers are available and the “Go To” buttom remains disaibled. I tried the following to fix the issue, but no luck:...
View Articleracal 6103/6104
Bonjour, Hi, Je cherche à récupérer l'état du Power Template en GPIB lors d'un test multimode.J'ai essayé GSE? et TSRGH? mails ils me retournent systématiquement 0 pour GSE et 7 pour l'autre. Quelqu'un...
View ArticleClik here to view.
visa read gps
I followed the following video as my GPS is made similarly: https://www.youtube.com/watch?v=SebcpkbYBd4 Okay I am posting this as noone has been able to help me yet and I am still at a lost...I am...
View ArticleHello, I need someone to help me on this program labview. when I try this...
Hello, I need someone to help me on this program labview. when I try this program, it tells me that there's an error and I have not found. I also need someone explains to me soon as possible (urgent)...
View ArticleClik here to view.
GAPS gather Mario Visa read
http://www.adafruit.com/products/746#Technical_DetailsHey guys, I am coming here because earlier I had vision problems you guys were very helpful, I was able to do a match pattern program! So I'm...
View ArticleTCP Read timeout
I understand there are other discussions on this topic already, however I have yet to find a solution amongst them. Here's the scenario:I have a host PC (running Win7) that's connected to an Agilent...
View Articleds345 instrument not found
I have a Standford Research Systems Function Generator (DS345) that I'm trying to communicate with using a GPIP-USB-HS. The GPIB-USB is recognized by the Measurement & Automation explorer, but the...
View ArticleConnect Lecroy WavePro 7300A oscilloscope to Windows XP PC via LAN
Hello, This is my first attempt to connect an oscilloscope to a PC. I cannot use a GPIB connection because the scope doesn't have a GPIB port, so I'm attempting to connect via LAN. Some background:-...
View ArticleArduino code for Xbee communication
Hi everyone, absolute beginner to bath Arduino, Xbee and Labview and looking for help. I am building a project to basicaly operate a remote control car wirelessly using labview and xbee series 1 and...
View ArticleControlling a Third party hardware
I am new to LabVIEW Instrument control.Here my duty is to control a servo motor controller using Lab VIEW. It is C-863.11 Mercury .I am attaching the catalouge with this question.Please guide me...
View Articleshc68-c68-D4 Cable
Hi All, Ok I have two PCB boards one with a straight VHDCI connector and the other one with a RA VHDCI connector, betweenthem I want to connect a Ni SHC68-C68-D4 cable between them. Now my...
View Articleivi scope only sets aquasition first time
So I have an odd issue. I am useing the IVI scope driver to control my scope over GPIB. My routine initializes the scope and then loops waiting for what to do. The first time I call the subvi to...
View ArticleDMA Options with NI PXI to 3rd-party PCI Device with no DMA Controller
Hi, I need to pull data out of my 3rd-party PCI device at 22MB/sec. The fastest I've been able to go using NI-VISA 5.4 in LabVIEW 2013 is 1.6MB/sec with the Move In 64 function. There is no DMA...
View ArticleClik here to view.
Error 1 occurred at Scan From String (arg 1)
I am communicating with the AT Trainer 5000 via serial port to USB converter. I installed all drivers of converter successfully and it is shown in MAX as com port. I also installed VISA software. I am...
View ArticleClik here to view.
Please help, urgently Error 1 occurred at Scan From String (arg 1).
I am communicating with the AT Trainer 5000 via serial port to USB converter. I installed all drivers of converter successfully and it is shown in MAX as com port. I also installed VISA software. I am...
View Article