Device myDAQ not available for NI VISA (Interactive Control) but it shows up...
Hi There. I try to use a myDAQ device on a WIndows 10 64 Bit device with Ni VISA 19.0 and Ni DAQmx 19.5 installed. (also tested with various other (older) versions). The device is connected via USB and...
View ArticleError 1073807339
I'm working on connecting and controlling B2981A keysightpicoammeter through LABVIEW.I have downloaded the LABVIEW from the NI site and it is an evaluation versionfor 7 days. Thereafter, I installed...
View ArticleClik here to view.
Enviar Array constante al Serial puerto
Hola muy buenas a todos,Necesitaria la ayuda de alguien en un problemilla que tengo. Les cuento:Tengo un array constante (A) de, en este ejemplo, de 6 elementos que quiero enviar al puerto VISA serial....
View ArticleControlling Eurotherm 2404 and keysight B2981A simultaneously through LABVIEW...
I want to control Eurotherm 2404 and keysight B2981A simultaneously through LABVIEW via single VI.Instrument drivers of both instruments have been installed. Both instrument would be operated...
View ArticleGPIB analyzer Interface not found error
Hi, I want to use Labview with SR830 with GPIB(National istrument). Software installed but when i started the GPIB Analyzer it gave the error of Interface was not found. Please note: GPIB-USB-HS is in...
View ArticleSerial communication (RS232) blocked after 25 hours fonctionning
Hi everyone, i just finished my first testbench to burn 5 custom products simultany. i have to communicate with UUT every 2 min that my bench exchange 5 data frames ( Write 5 data & read 5 Data)....
View ArticleClik here to view.
AT-GPIB Driver
Hello Everyone,I have a legacy AT-GPIB (ISA) card that is working under DOS (see pic). I need to install this to run under windows (Me/9x, NT, 2000 or XP).I Don't have the drivers for this card (i.e....
View ArticleClik here to view.
Write and Read takes long time BLE bluetooth bled112
Hi, I have downloaded the BLE driver made by community member.https://forums.ni.com/t5/Community-Documents/LabVIEW-BLE-Bluetooth-Low-Energy-toolkit/ta-p/3538612 I have written a program to...
View ArticleControl R&S FSC 6 with visa and Python script
Hi All,I have an R&S FSC 6 connected via USB but I cannot view the instrument resource with VisaConfigure nor connect using RsVisaTester. I can do this no problem with FPC1500 and FPC1000.Is FSC 6...
View ArticleDMM 18.5
Hello,After having installed DMM 18.5, in MAX appears 18.2 !?Is it normal and what is really installed ?BR.Pascal.
View ArticleError 10609
Got "Error 10609 occurred at AI clock config" possible reasons:NI-DAQ LV: A transfer is already in progress for the specified resource, or the operation is not allowed because the device is in the...
View ArticleCommunication Error 800
Hello,I am using Keithley 2400-C Sourcemeter, Labview 2013(32 bit), Keithley Drivers Version 3.12 and my Laptop is 64 bits and it has Windows 10. The Keithley Source meter is connected to the laptop...
View Articledriver for old software
I have been given some software in VB6. I have all the code but not the NI drivers When I try to run the code I get the error Could not locate the assembly "NationalInstruments.UI.WindowsForms,...
View ArticleCommunication LabView with Keithley 27XX by GPIB - VISA
Hi Everyone, I have a communication problem between LabView, and my device Keithley 27xx, I will show some screenshots, I have tried to fix that communication which works at VISA Test Panel, and...
View ArticleRecommendations for GPIB to Fiber extenders
I need to be able to isolate my GPIB cabling into an anechoic chamber using a pair of GPIB to Fiber extenders. I have a pair of HP 37204 extenders but when I connect them up to my NI PCIe GPIB card,...
View ArticleSiglent SDG2082X
Dear all, I have got a Siglent SDG2082X waveform generator that I would like to control from a C program using the Siglent IVI-C driver. The generator is connected to the LAN interface and is correctly...
View Articlekeithley 2400 connection issue even output off
keithley 2400 source meter is used to charge a capacitor in the lab controlled by a labview programme. But as soon as the charging process is finished (programme ending at the same time) and the front...
View ArticleGPIB-ENET/100 IP address configuration
Hi,I am looking for a NI-488.2 driver for either opensuse 42.3 or MacOS 12 to reconfigure the static ethernet address of a NI GPIB-ENET/100. I set it to factory default, but was not able to communicate...
View ArticleCan PCI-8430/2 RS232 Card Reach +-12V Output Level?
Hi, I need to interface some old equipment that requires +-12V on its serial port. Would PCI-8430/2 do the job? How can one set the output voltage levels for this card? Can it be used just as another...
View ArticleNI-845x .18
I want to know if the software drivers ( NI-845x 18.0 ) is 32-bit or 64-bit and if it is 32-bit that means some features won't be found.
View Article