Problem with my Lock In Amplifier (SR830)
Hello! I'm just starting to work with the device. I have a few questions.Can I make a triangular reference signal?Can I transmit the reference signal via GPIB?sry for my english
View ArticleMounting RMC 8356 Rack Mount Controller
Can I use the RMC8356 on a rack with a front-back rail distance of 25.25" (640mm)?When try to compress the rack rails to this dimension, they fall apart.Is there a minimum front-back rail distance for...
View ArticleClik here to view.
The "Acquire Input Data.vi" does not recognize the keyboard layout correctly.
The "Acquire Input Data.vi" recognizes the keyboard layout as an English layout, although the layout is actually German.The Expectation Value:- The "Acquire Input Data.vi" automatically recognizes the...
View ArticleNI USB 4431
Greetings! I have some issues with USB-4431, NI-DAQmx driver was properly installed and the instrument already appears on Device Manager. But I can't find it on MAX and when usb cable is plugged in,...
View ArticleGNURadio with USRP-2944R
I have a USRP-2944R which I would like to initially work with GNURadio. I created a blcok diagram with the "UHD:USRP Source" block but don't know how to get it to address the 2944R over PCIe interface....
View ArticleLegacy NI-488.2 drivers for Windows 2000
I usually only check the NI-488.2 driver page for newer drivers, but I thought that at least in the last few years older drivers were still listed on the driver page. I can't find anything older that...
View ArticleUnable to do iviSessionFactory.CreateDriver for NI ykdlm2000 IVI-driver
Hello! Im trying to connect to a Yokogawa DLM2054 using the NI-IVI driver referenced by Yokogawa...
View ArticleUSB RAW error 0xBFFF003D and 0x3FFF0082
Hello, newbie to USB RAW here. I am attempting to communicate with a packaged system from Newport Insturments. It is a power supply that controls a lamp and is connected to a monochromator (in series)...
View ArticleSR830 lock-in-amplifier programming
Hello!I need to send a signal via GPIB to the AUX OUT using a labview.I can pass one value in volts with a command.But I don't understand.Do I need to write a cycle in which I will consistently...
View ArticleGPIB Error 6 occurred at GPIB Read
I am using labview version 2011. I want to communicate with SRS boxcar averager. But it shows the error 6.Please give the solution
View ArticleNI VISA Configuration - interface USB manquant
Bonjour à tous,Je me retrouve devant un problème qui nécessite vos conseils.Je souhaite piloter par USB le multimètre Keithley 2110 5 1/2 Digit multimeter (voir...
View ArticleNI-488.2 installation on Windows 10
NI-488.2 V15.5 or newer can support Windows 10, however the previous release e.g. V14.0 can install on W10 as well. Furthermore the new version cannot be installed successfully if the previous version...
View ArticleGPIB PCIe card communication with Keithley DMMs and SMUs occasionally freezes...
Hello, while trying to read the buffer of a Keithley DMMs or SMUs (2450 e.g.) many times fast enough the in NI-Max freezes, no response and needs to be killed in task-manager. Same happens using .NET...
View ArticleMultiple command in LabView via RS-232 by New focus 8753
When I sent a command writing in a string at one time, a picomotor actuator was worked. But when I wrote all commands in in one string, the actuator didn't work. The problem is about sending multiple...
View ArticleGPIB and Raspberry PI
I am looking for information on how to control a multi-meter using GPIB connected to a Raspberry PI via a GPIB to USB adapter and controlled by code written in Python? I have a project that can use...
View ArticleFirewall blocking communication
Hi, I tried the Hello World program to connect to a device via ivi. When the firewall is enabled I get an Error: var resourceString2 = "TCPIP::10.25.46.125::hislip0";...
View ArticleClik here to view.
Problem with Agilent 34401A
Hi, I would like to connect with Agilent 34401a by GPIB. Unfortunelly it doesn`t work. I used adapter USB-3488A from brand Adlink. NI MAX does not read the device. I have got all neeeded drivers....
View Articlehttps://youtu.be/DTrqQUBuPlw
Can you imagine what this toxic waste is doing to our health? Keeping a food diary will give you a much clearer idea of where your calories are coming from. There really is no need to count...
View ArticleCommunication between pc (c#) and microprocessor via USB- VISA driver
My lecture has given me a project with the name above. The microprocessor I'm intending to use is STM32F407 (the only one I got). Can someone help me to specify what exactly I have to do now? I have no...
View ArticleVISA - Queueing
Hi,I having a problem to read data from ADC transmitted from pic18F4580 via UART. The data transmitted reads from 8 ADCs plus with 0 (originally is *END* which is marked for end of iteration).To...
View Article