Keysight 81150A Multifunction Arbitrary Generator
Please if someone can help me I have to work with this generator to generate a waveform and I do not know how to do it is the first time thanks
View ArticleProblemas comunicación modbus RTU con EE355
Buenas,necesito comunicarme con un transmisor de punto de rocío (EE355) y no soy capaz.Aquí están la guía rápida y la...
View ArticleProblemas de comunicación con fuente Sorensen XG 300-5.6
Hola, Estoy tratando de controlar con LabView la fuente de alimenación Sorensen XG 300-5.6. Para ello estoy utilizando un cable GPIB y me comunico mediante VISA. Aparentemente las funciones funcionan...
View ArticleRe: sr830 Fast transfer mode hangs up
Anybody solved this problem? I am struggling on the fast reading SR830, too. I wish to have 200 or more readings per second from SR830 to computer. WTLV2013
View ArticleISOLATED DRIVERS FOR GPIB-USB-HS+ AND USB-232
I'm in the process of migrating a legacy data acquisition system to a modernized hardware/software platform. As a stepping stone, I need to use NI GPIB-USB-HS and USB-232 devices. The driver download...
View ArticleHow to Install VISA 32-bit from the NI Website on a Computer (Windows Xp)...
Hi, I'm trying to install NI-VISA 15.5 on a Windows XP (SP3) 32-bit desktop, but I get a message saying that the downloader needs to access ni.com. My desktop does not have internet connection so this...
View Article+91-9975863120@@@ love related problem specialist, BABA ji in Pune
+91-9975863120@@@ love related problem specialist, BABA ji in Pune +91-9975863120@@@ love related problem specialist, BABA ji in Pune +91-9975863120@@@ love related problem specialist, BABA ji in...
View ArticleLabview crashes suddenly while running
Hello,I am Lipika, working on a monitoring system using labview.Though the serial communication between the hardware and the labview is made successfully initially , the connection is lost during...
View ArticleError -221 when runing Single Measurement Example in Keithley 2700 with 7702...
Hello All,I am trying to use the examples provided in the Keithley library in LV 15. I am using ''Keithley 27XX Single Measurement'' for front and rear panel measurements. As far as the front panel is...
View ArticleHow to save data on a PAR 273 potentiostat via GPIB
Greetings,I am trying to use a PAR 273 potentiostat to perform and record cyclic voltammetry via GPIB/USB interface with a computer. Using labview's I/O feature I can control the potentiostat with the...
View ArticleGetting the IOSession from an IVISession that was created in a wrapped IVIC...
Dear all, I have createda C# wrapperfor the IVIC driver of the 34420A Micro-Ohm Meter from Keysight (formerly Agilent)using NI Measurement Studio I am able to initialize the instrument using the...
View ArticleKeithley 2601 & Labview
I have Keithley 2601 and I am using attached example vi from NI. But I am getting error 1073807339, and instrument doesn't go into remote state.Any help in this regard would be very much appreciated.
View ArticleKeithley 2601 & TSP cmds
I have to sweep voltage and measure current using Keithley 2601. I am using Rs 232, with a self-made 'vi'. I am communicating with instrument and trying to send following TSP commands but getting...
View ArticleFeedback loop design
I'm wondering if you can recommend the hardware we need for this project I need to understand what hardware I would need to buy in order to build a feedback loop where the blood pressure (measured from...
View ArticleClik here to view.
GPIB-USB-HS driver not working under Windows 10
Hello, I would like to have a feed back regarding an issue I am experiencing with the GPIB-USB-HS driver in Windows 10. Attached is the a snap of the VISA and NI-488.2 version I have installed. First...
View Articlereading watts and current inside state machine from xitron 2801 power analyzer
Hello! I have one vi that I created and another vi from someone else. I am trying to pull the data (watts and current) from the power analyzer similar to how I have the top half of the state machine.vi...
View ArticleClik here to view.
Continuous data acquisition
Dear all,I have an oscilloscope (DPO4104B) and use the certified LabVIEW plug and play instrument driver. I want to do continuous data acquisition (1 kHz repetition rate) with a trigger signal and...
View ArticleVISA port cannot be opened after disconnecting a device and reconnecting it
I have this very annoying problem in LabView (2014): I have devices that I'm communicating with over a virtual COM port (VISA). If I erroneously disconnect or power off that device while my VI is...
View ArticleSerial communication with Fluke 7526-A calibrator
Hi all,I need to communicate Labview 2015 with Fluke 7526-A calibrator over RS-232/RS-485. I have searched in the web site for 3rd party instruments drivers but I did not find drivers for this...
View ArticleNI IO Trace 17.0 export to Textfile and aquistion of 1024 or more bytes at...
Hi. I use NI IO Trace that comes with NI-VISA 17 to log comports. The logging is incomplete if I try to log directly to text file and the export to textfile does not work, if I logged it in the...
View Article