Hi,
System Windows 7, MAX 5.50f0 , pci-6221, and SCB-68A
I am using an Advantec computer with window 7 32 bits.
MAX 14.0 was not able to show a resource name to this card but it was able to recognized that it was installed. So, after loading several version of NIDAQx, NIDAQ980f3.exe worked, showing resource names and I was able to do all posible test and calibrations on the card..
I used "Visa find resource" to find the pci-6221 card resouce name but it is PXI2::13::INSTR. The card is directly set up in one of the available PIC slots in the computer.
I have read that the resource name for this card should be something like PCI::13::INSTR when it is setup in the PCI computer slot..
Are there any issues with this name after I program all the inputs and outputs in MAX?
Will be this and issue when I use the config file created by MAX for the I/O when I call it from my program?
The bad news is also that I am using Labview 8.0 to create this program.
Cheers
Sergio