Hello,
I'm not expecting much on this since we are trying to do the impossible but here it goes.
We recently started having issues with our Windows 7 32 bit OS connecting to our perkin elmer 300 via the NI PCI-GPIB card while using the AA winlabs program. It give us the following:
> 26. TestSRQ(0, INVALID)
> Process ID: 0x00000FE4 Thread ID: 0x0000107C
> Start Time: 14:32:58.689 Call Duration 00:00:00.326
> ibsta: 0x8000 iberr: 0 ibcntl: -535560155(0xe0140025)
And continues repeating this error along with some others I have attached. I'm completely at a loss of what to do next and this is my last hope before we have to bite the bullet on a whole new system. It was working for the past year, but now suddenly is giving us this issue.
Some of the things I have tried, we have 2 of these cards, I swapped them and continued receiving this error. I swapped PCI slots with both cards with no luck. I have uninstalled everything and re-installed with both cards, on both PCI slots, restarting between all instances of uninstall/reinstall. I have started over with a fresh installation of windows 7x86, installed all drivers, installed software for the PE 300. Still no luck. I then started to swap out the cable that connects these, but that didn't change anything.
Thanks in advance.